LOW FLOW RANGE - SINGLE STAGE - PROCESS GAS PURGING SYSTEM

MANIFOLD FOR PURE GAS SUPPLY SYSTEMS, Two sources, Manual change over system, Process gas purging system

The manifold used in gas supply systems for pure, inert, flammable, oxidizing gases and gas mixtures. Not usable for corrosive and/or toxic gases and gas mixtures. Maximum gas purity is 6.0. 

TECHNICAL SPECIFICATION

• Switching between two sources by the manual valve actuation
• Regulator and Valves - Hastelloy/Elgiloy diaphragm tighting system to atmosphere
• Compact design
• Excellent pressure adjustment
• Valves - designed and approved in accordance with relevant sections of EN ISO 10297:2015 (including O₂ - ignition test for the main valve)
• Regulator - designed and approved regarding ISO 7291 (including O₂ - ignition test)
• A relief valve in the delivery pressure side
• Manifold with purge valve for process gas purging
• Available with a shut-off valve at outlet, safety valve at outlet, check valve at the inlet
• Electrostatic chargeabitlity test
  • Fulfils requirements according to DIN EN ISO 80079-36, IEC TS 60079-32-1 and German TRGS 727
  • Usable in Ex-areas zones 1 and 2 for gases with explosion risk group I, IIA, IIB, IIC

SPECIAL FEATURES OF MANIFOLD

• Splitted plates of the manifold
  • Separated mounting of the ground plate
  • Easy mounting of the manifold to ground plate and fix with one screw only
• Front plate cutout for in-field gauge replacement

TECHNICAL DATA

Technical datasheets

MPLHXMSP-EN
MSLHXMSP-EN

Direct link to druva product configurator