EXTENSIONS FOR LOW FLOW
DruvaPUR® extension header kits for manifold
This extension header kits are used to increase number of high pressure inlet ports for manifolds in gas supply systems for pure, inert, flammable, oxidising gases and gas mixtures up to gas quality 6.0.nd gas mixtures.
TECHNICAL SPECIFICATION
Extension Header Kits were used to connect more than one gas cylinder on each side of the manifold. It can consist of diaphragm shut-off valve, tubing, inlet and outlet connection. Upon request, it can be equipped with check valves, gauges and vent valves, pressure transmitter and contact gauges. They can be delivered with up to 4 inlets. The Extension Header Kits are designed for safe handling of high purity gases.
SPECIAL FEATURES
- Up to four additional inlet ports are possible
- Variable, configurable system
- Extension Headers are optional equipped with a manual actuated diaphragm valve, non-return valve, gauge, contact gauge, pressure transmitter
- Complete kits are available
- Valves - developed, tested and produced in accordance with relevant sections of ISO 10297:2015 (including O2 ignition test for the main valve)
- Non Return valves -The special seat seal and the use of selected gas-wetted parts allow the use with Oxygen up to 300 bar
- Electrostatic chargeability test
Fulfils requirements according to ISO 80079-36, IEC TS 60079-32-1 and German TRGS 727
Usable in EX- areas zones 1 and 2 for gases with explosion risk group I, IIA, IIB, IIC
TECHNICAL DATA
| Max. working pressure: | 300 bar | |
| Working temperature: | - 20 °C to 60°C | |
| Nominal Flow Rate: | 20 m³ / h | |
| Material: | ||
| Body (PUR line) | EPLCP0C/EPLDSMF – Brass chrome plated (CW614N) | |
| Body (SST line) | ESLCP0C/ESLDSMF – Stainless Steel (1.44.4) | |
| Dimensions LxDxH (max): | L030 (recommended for gas cylinders) |
L100 (recommended for gas bundles) |
| 1 inlet | 333 x 67 x 220 | 1033 x 67 x 220 |
| 2 inlets | 630 x 110 x 220 | 2033 x 110 x 220 |
| 3 inlets | 928 x 110 x 220 | 3033 x 110 x 220 |
| 4 inlets | 1226 x 110x 220 | 4033 x 110 x 220 |
| Specials: | Check Valve – Type CV300 Vent Valve – Type MVA530LG Check Valve + Vent Valve |
|
| Gauge Type: | Bourdon Tube Inductive Contact I1 Reed Contact R5 Pressure Transmitter Ex Pressure Transmitter Non-Ex |
|
TECHNICAL DATA - TUBE
| Material: | Stainless Steel 1.4404 / 316L |
| Outside Diameter: | 1/4“ |
| Wall thickness: | 0,035“ |
| Gas wetted surface finish: | Outer surface Ra<=1,0 μm Inner surface Ra<=0,8 μm |
| Cleaning: | free of oil and grease acc. to ASTM G93 11.4.3.1 - Level AA |
Télécharger les fiches techniques
DruvaPUR Extension header kits for manifold_EN.pdf
Télécharger les documents de sécurités
Instruction for Use - Extension header rail.pdf
