Based on the proven heat transfer design of the XHR-300, the XHR-301 allows greater outlet pressures to 150 barvia its piston sensed element. FEATURES ATEX certified to EEx d IIC T3 Dual, independent, 100 W heaters for pre heat and re-heat of sample gas 316SS Piston sensed element for low torque adjustment and high pressure control Large surface area for heat transfer Easy to wire circuit board with 115 V or 230 V supply Stylish Junction

The MINI-300 provides an economical, lightweight, and versatile regulator range, designed for customers who want accurate control from a compact unit.The standard units utilise two piston sensing options to allow pressure control from 5 psi to 1000 psi (and a modified version up to 3000 psi). SPECIAL FEATURES 38 mm diameter body provides small foot space Fully supported ‘sensitive’ pistons with low pressure and high pressure outl

The BP-LF690 is a back pressure regulator for gas or liquid applications suited for typical low flow applications to xx (liquid), this accurate regulator controls inlet pressure and vents excess pressure back via the threaded ½” NPT outlet port. FEATURES 690 bar/10000 psi inlet pressure Metal to metal seating for liquid and PEEK seating for Gas Precision machined sensing elements 3 Sensor ranges for combination of low torque a

Certified to ATEX directive 94/9/EC, the XHR-300 helps to maintain saturated gases in their vapourised state due to its unique DUAL heating design. Two 100 W heater cartridges, or steam tubes, are inserted in spiral machined sheaths, which agitate the media to help with the heat transfer and analysis process. The propriety PCB is easy to wire and incorporates an adjustable potentiometer to adjust the temperature setting to the heaters. FEATURES

Based on the same design features of the LF-690 Hydraulic Regulator, the LF-692 incorporates a PEEK seat for use on high pressure gases, using a range of precision machined sensing elements to provide control of pressure to 690 bar. The regulator is self relieving with segregated captured vent to allow vented gases to be piped away to a safe area. The seating area can easily be accessed from the base of the regulator for speedy servicing in situ.

A compact and economical high pressure regulator with precision machined sensing elements to allow fine pressure control on pressures up to 414 bar, which can be supplied as none venting or self venting (none adjustable). FEATURES 550 bar / 8000 psi inlet pressure Economical Design Precision machined sensing elements Load bearings and large handwheel for low torque adjustment Excellent sensitivity Self venting and non venting options

The MF-101 incorporates a large precision machined sensing element to control outlet pressures up to 35 bar from a maximum 100 bar inlet. The main valve is an unbalanced design to create positive shut off on gas or liquid applications against the PEEK seat. Lightweight compact design Piston sensing element High accuracy

Device which enables to connect humidifier to the combi valve.

Art. Nr. Application Connection (EN 560) 14056015 Cutting oxygen G 3/8" 14056016 Heating oxygen G 1/4" 14056017 Fuel gas G 3/8"LH 203010607P Oxygen UNF 9/16" 203010609P Fuel gas UNF 9/16" LH

IDEAL FOR:Zincwork, roofing, tinplate work. TECHNICAL DATA Chemical composition (%) Sn:33 Pb:67 Melting range: 183 - 243° C SOLID RODS Art. Nr. Description Pcs/pack Qt. B135202K GAZETAIN B 33 Rod 5 1 kg STRIPS Art. Nr. Description Pcs/pack Qt. B135206K GAZETAIN B 33 Strip 2 2 kg * To be used in combination with Flux GAZETAIN PLUS. 1 strip = 1,1 kg